Archive for the ‘Uncategorized’ category

DIY Roofing Projects

July 6th, 2021

One common mistake made by those seeking the adventure of installing a new roof in “do-it-yourself ” fashion, is to underestimate the amount of time it will take to complete a roof. If you are doing a job yourself, chances are you are recruiting family and friends to help you. If the you and those people working alongside you are not used to working outside in the heat, they can easily tire and make your project last twice as long as projected. Also, if you do not have specialized roofing tools, and instead use common household tools such as hammers and flat nose shovels, a roof tear off can take longer than expected and become a bit of a trial.

Underestimating the amount of time a roofing project will take can become a serious problem, especially if the weather forecast changes or if you are forced to leave your roof half done for a few days while you return to work or other commitments. I have seen more than one house flood, to the point that they had to replace sheetrock, carpet and furniture, because they were doing the job themselves. The wind blew off their covering, or the roof was not covered in time, as an unexpected downpour moved through.

It is difficult to tarp most roofs because one tarp will not cover the entire exposed area. If you combine tarps to cover the exposed roof, it is vitally important to overlap the tarps such that water will not funnel under tarps and into the living quarters and cause interior damage. When tarping a roof, you also need to go around water heater and furnace exhaust pipes, as well as chimneys and swamp coolers, etc. Often, the wind will blow a tarp off a roof during a storm leaving your home exposed to the elements.

To help prevent this, use battens (1×2 lumber) and 8 penny nails throughout the field of the tarp. It is always best to tear off only what you can secure properly by that evening with underlayment properly installed around all roof penetrations. Don’t forget to check credible weather forecasts, such as NOAA.gov, throughout the project, viewing satellite images of the weather. A change in the weather can spell disaster for you and your home.

Experience

Another common DIY roofing obstacle is lack of experience. Even your family and friend’s best intentions in helping you on your project will not make up for inexperience. There are certain areas of a roof that need to be installed in a specific manner and order, including ice shields (after drip edge) at eaves, valleys and penetrations. This is why it is a good idea to always have at least one experienced roofer helping when you install a roof.

It is very important to install a proper ice shield on your roof, especially in areas with heavy snow. It is essential to have this secondary measure against moisture penetration and leaks. An ice shield will protect your home as ice dams up in the eaves and valleys and against walls. This roofing technique should be done by an experienced roofer to ensure your home is protected.

Also, keep in mind that inexperienced roofers can actually damage your shingles. If they move across your roof in a way that scuffs the shingles with their shoes or tools, they can remove granules from the shingles. These granules protect the asphalt shingle. Without them, the sun can wear out the exposed asphalt where the granules are missing. These situations can be costly, and are easily avoided by using experienced help.

Safety

When planning a DIY roofing project, be sure to consider the element of safety. Make sure you are using a sturdy ladder without any damage. If you are on a steep roof, you will need harnesses, safety nets and / or guardrails to prevent any falls. About 8 roofers die each year in the US because of falls, and many more are injured.

Also, be aware of power lines near your roof. Keep the ladder away from these power lines, and be aware of them as you are carrying any metal roofing materials. Electricity has been known to arc or jump from these lines for several feet if precautions are not met.

In addition to safety on the roof, be sure you are aware of people, animals and vehicles on the ground that could be damaged by falling objects. It is not worth someone getting injured to skip over these safety procedures.

Finances

The most considered reason for roofing a home yourself usually comes down to finances. However, there are a few options to consider that can help you afford a professionally installed roof. If you can in any way afford to hire a contractor, do it. You can end up spending more money in repairs over the life of your roof than you would have initially by hiring out.

If you are not currently in a position to hire a contractor to install your roof, look into the possibility of patching your roof while you save for the project, or if necessary, a home loan for your roof, breaking down the expensive project into reasonable regular payments. Also, consider performing the tear off yourself and hiring out for the installation. This can really help reduce the overall price of your roof.

Installing a Roof Yourself

If you have no other option but to install your roof yourself, be sure to come prepared. Take the time to do plenty of research. Read advice from your shingle’s manufacturers, or from certified roofing contractors. This is not a good project in which to follow the advice of a DIY blog. Instead, make sure your sources are both credible and experienced. We recommend Owens Corning and Certainteed shingles, who both offer installation instructions for each shingle listed on their websites. Also, GAF has a great general DIY section of their website that will help you plan and carry out a successful roofing project.

Even after you have done the proper research to become knowledgeable about installing a roof, it is still a good idea to consult an experienced roofer. If you need any advice, or have any questions, don’t hesitate to call a roofing contractor.

Another great option is to hire a roofing consultant to come to your home and guide you through the roofing process. A consultant usually costs about $200 a visit. It would be a good investment to have a consultant come after you are finished tearing off your old roof and immediately before you begin installing your new shingles. This will help ensure that you are using correct tools, techniques and materials.

Watching anime online at https://vnssub.net/ faster and free

ดูหนังออนไลน์

ATS and CRM to Gain New Business in a Recession

July 2nd, 2021

Is it accurate to say that we are in a downturn? A few specialists say we are now in a downturn, some say one is coming, and others anticipate our financial future will be something we haven’t seen since the Great Depression. While these situations are agitating, there is consistently freedom to acquire new business and flourish, in any event, when challenges are out of control. Your business system will doubtlessly need to change in a downturn, however the means you take presently can assist with setting you up to dominate the competition when the entirety of this is finished. It’s never past the point where it is possible to get ready for what’s to come or, for this matter, what is now here.

Before we plunge into how you can utilize your ATS/CRM to discover new business, first we need to distinguish a couple of key parts. The first is distinguishing which enterprises are flourishing and are sought after. Second, recognize the ventures where you have the methods and generally potential to work with. There might be ventures you haven’t investigated previously, there might be enterprises you’ve worked with before, and there might be new business openings in a portion of the businesses you at present work with.

To assist you with beginning, here is a rundown of a portion of the businesses sought after:

  • Food/Alcohol/Grocery
  • Clinical Staff
  • Clinical Device
  • Drug
  • Assembling
  • Conveyance Services
  • Shipping/Railroad
  • Paper Products
  • Antibacterial/Cleaning Products
  • Authoritative
  • Online Education and Remote Learning
  • Ways of life of Health and Sustainability/Wellness
  • IT/Accounting/Legal
  • Printing/Publishing
  • Broadcast communications/Cable

As you see this rundown, do you possibly see new freedoms?

Looking through Your ATS/CRM for New Business

When you have the rundown of ventures you need to focus on, it’s an ideal opportunity to utilize the inquiry capacities in your ATS/CRM to discover you explicit freedoms.

Search by Client Industry Code, Status, and Location

The first and most fundamental hunt you will need to perform is by customer industry code, status, and area (on the off chance that you are hoping to staff in a particular region.) The business codes will be the codes you arrangement in the product partnered with every industry. Status is significant, on the grounds that it will decide whether you are looking for organizations that you are ‘effectively’ working with or ‘inertly’ working with. You can perform the two quests. Check whether there are organizations you presently work with that you can contact. Then, at that point play out similar hunt with ‘inert’ customers. These could be customers whose business you lost or never had the chance to work with. For area, perhaps you need to attempt to help staff for organizations close to you. It very well may be an approach to initially limit your hunt to nearby organizations. Investigate these various ventures and check whether there are any likely chances.

On the off chance that your product has the capacity for a “full content pursuit”, this is another incredible hunt choice. A “full content hunt” is a high level pursuit include that looks for key terms in every customer profile. Along these lines, in the event that you need to look for “clinical”, it will look through all customers that have “clinical” some place in their profile, regardless of whether that is in an email, an instant message, a note, a remark, and so on.

Search by Date Last Contacted

You can likewise look by Date you last reached a customer. This hunt can be utilized related to the above search models. Looking by Date is helpful on the off chance that you need to recognize customers you have been in touch with over the most recent a half year. You can likewise look for customers outside of this time range, on the off chance that you need to discover customers you haven’t been in contact with for some time. This hunt can particularly be convenient on the off chance that you need to discover ‘latent’ customers you haven’t connected with as of late. Possibly the last time you connected they didn’t have staffing needs, yet presently they do.

Search by Job Orders

You can likewise look by Job Order dependent on explicit ventures you have served before. This will permit you to distinguish openings that you had in the past that fit the sought after promising circumstances you are searching for now. There might be customers on the rundown that you haven’t been in contact with for some time. Connect with them and check whether they have occupations they need to fill.

Search by Candidates Employment History

Another extraordinary hunt is by Candidate Employment History. You can play out a competitor search and target explicit enterprises applicants have worked in, before. By doing this, you can distinguish new customers you probably won’t have in your information base. You can get going by playing out an inquiry of competitors you have included the most recent few years. This will give you a reasonable rundown to work through. As you go through customers that fit the ventures you are hoping to jump into, check whether they are in your data set, if not add them and call them! A “full content pursuit” can likewise prove to be useful here to scan a competitor’s profile and resume for watchwords.

Make Favorites Lists

As you discover customers, you need to add them to a top choices list. Some product arrangements have the capacity to add to a top picks list directly in the product. On the off chance that you don’t have these abilities, you will in any case need to make a top choices list in a different bookkeeping page. As you are looking for customers, add them immediately to your top choices list so you don’t forget about them. As a best practice, make a rundown for every industry you are hoping to target so your rundowns are coordinated when it comes time to calling.

The Special Offer

You have your top choices records, you have the businesses you need to target, presently you need to choose what you will offer these customers. Consider your showcasing plan, what impetus would you be able to give the customer to cooperate? Contingent upon the business, you may have to think of various bundles that boost your association. What will tempt a customer to work with you instead of your opposition? Maybe you can offer uncommon membership choices, fixed rates, free preparing or something to that affect, and so forth

Separation and Conquer

Since you have your designated records and promoting plan per industry, it’s an ideal opportunity to call! First you should choose if you will call the entirety of the customers or on the off chance that you will split it among your colleagues. On the off chance that your product has the capacity to add customers straightforwardly to a day by day organizer, it’s anything but a fast and smoothed out approach to do it directly in the product. Else, you can share each rundown you made with your colleagues.

Sending Follow-Up Emails and Text Messages After Calling

After you call every customer, a best practice is to send a subsequent instant message or email, whichever is generally fitting for the customer you are working with. Sending a subsequent message will repeat the discussion that just occurred. In the event that you don’t have the portable number of a possibility you are working with, you can inquire as to whether they would normally like an email or instant message follow-up. On the off chance that they incline toward an instant message, you can request their portable number.

To smooth out the subsequent correspondence, make text and email formats that you can use for every customer and consistently make sure to tweak it to make it individual. You can without much of a stretch do this by adding the contact name and friends. Some product arrangements permit you to make layouts directly in the product and through the product it will naturally tweak the name, organization, and different fields dependent on the individual you are sending the message to.

The Candidates

The customers are just one piece of the riddle. We can’t fail to remember we additionally need to arrange possibility to fill the chances you are acquiring. As you start advertising to customers, you additionally need to start looking for applicants. Utilize the hunt abilities in your ATS to look by industry, position, abilities, work history, area and so on Furthermore, remember about that significant “full content inquiry” ability in the event that you have it.

You can likewise look by “dynamic” and “dormant” competitors. There might be a few applicants you’re not working with as of now, however are searching for occupations or are available to doing a switch. Scour your ATS and start making top choices records so you are ready to start calling these up-and-comers whenever new position openings arise.

Similarly as with customers, make sure to circle back to applicants with an instant message or email. Have your layouts all set so you can without much of a stretch send them a subsequent correspondence.